Home 
Faq Page 1
Frequently Asked Questions
Welcome to our frequently asked questions section. Below you will find answers to the most common questions we encounter. If you have a question that has not be answered please let us know.
Are GEN I and GEN II products compatible?
Logged at 12:03pm on March 24th, 2007
Short answer, no. Our second generation product line incorporates a different brand of hardware, specifically the GhillieTex™ line from ITW Nexus. This change in hardware renders GEN I and GEN II products incompatible. GEN I product requires GEN I weapon attachment stubs and likewise, GEN II product requires GEN II weapon attachement stubs. continued…
How do I loosen the castle nut on my carbine?
Logged at 07:33pm on December 12th, 2006
First check the perimeter of the castle nut where it mates the receiver end plate to ensure it wasn’t staked at the factory. If it has been staked, you will see an indentation where the plate meets the castle nut from the impact of a punch. If staked, you will need to apply quite a bit of pressure to break the stake ( possibly a more stout continued…
Which weapon attachment stub do I need?
Logged at 11:21am on December 7th, 2006
The weapon attachment stub required depends entirely on how your weapon is configured. The auxiliary stub is used when you have a slotted sling loop. The H&K snap hook stub is used when you have a donut type sling loop. The stock stub is used when no sling loops are available on your weapon and you have a tapered solid stock ( ala AK47, Shotgun continued…