This kit comes complete with our GS-3120 offset Scout Mount. The M600C Scout Light® attaches by means of an integral thumbscrew clamp to long guns equipped with a Picatinny rail. Its small size increases weapon maneuverability, increases rail space available for other accessories, and minimizes added weight. It uses a high-efficiency LED emitter, virtually immune to failure since there’s no filament to burn out or break, and a Total Internal Reflection (TIR) lens to create a beam with good reach and significant peripheral light for close- to medium-range applications. Maximum output is 200 lumens, and it produces tactical-level light-more than enough to temporarily overwhelm the night-adapted vision of an aggressor-for over two hours per set of batteries. The M600C has two switch options: (1) a pushbutton tailcap switch: press for momentary on, press further to click constant-on; (2) a momentary-on tape switch with a 7-inch cable that attaches to your preferred location via self-stick Velcro® backing. Constructed of high-strength aerospace aluminum with Mil-Spec hard anodizing for superior toughness and corrosion resistance, and optically coated tempered glass for maximum light transmission, the M600C is O-ring sealed to keep out dust, dirt, and moisture. Battle-tested, built to withstand the rigors of combat. Available in Black or Desert Sand.
Installation is straight forward. Using the included T9 Torx Key, remove your factory Surefire mount. Next, remove the socket head cap screw from the mount body. Apply a drop of Vibra-Tite® VC3™ ( included ) to the last few threads on each screw and allow to dry. Install your light using the two (2) included 8×32 5⁄16th long socket head cap screws. Slide the mount onto your rail system, insert screw / clamp assembly and tighten it down with the included allen wrench.